vtrstormer
Admin
I feel the need, the need for a few twisties and a latte!
Posts: 1,663 
|
Post by vtrstormer on Aug 8, 2014 17:46:03 GMT 10
Hi guys,
looking to remove the engine from the spare bike but just need to know what to look for, any special tools needed etc. any help is greatly appreciated.
thanks in advance
|
|
|
|
Post by kenmoore on Aug 8, 2014 18:16:31 GMT 10
Stupid tool,to undo bolts,
You can make them out of an old socket.
Remember if you put the motor back in you need to follow the manual as the sequence and tensioning of these bolts is critical to the handling.
Our frames are designed to flex!!,
I also recommend that if you are going to put the motor back in that you take lots of pictures to get wiring and hoses in their correct locations.
I used masking tape and a number system.
I removed the engine when I did a heap of mods and having done shit like this before was happy that I documented and marked everything.
Makes it sooooo much easier as I tend to forget things after a while.
I suffer from CRAFT disease!!!!
|
|
