|
|
Post by lucifer71 on Mar 15, 2018 21:04:29 GMT 10
I'm hoping somebody can recommend a good jetting kit, the old girl feels very flat she won't pick the front end up no matter what I do and it seems to stumble at about 2 1/2 3000 rpm and won't rev match past 7000.
Any Help and recommendations would be much appreciated
|
|
Kev W
Moderator
Quake 2003 VTR1000F Black, Parkwood, Gold Coast, Qld.
Posts: 289 
|
Post by Kev W on Mar 16, 2018 12:15:04 GMT 10
Jas the Factory Pro Ti kit is the one Jay Morrison and Bobby Kuhl recommend mate
|
|
|
|
Post by kenmoore on Mar 16, 2018 18:06:28 GMT 10
Dynojet kit mate but don't drill the slides!
|
|
|
|
Post by lucifer71 on Mar 16, 2018 22:10:53 GMT 10
Thanks I'll chase one up
|
|
|
|
Post by lucifer71 on Mar 17, 2018 10:44:24 GMT 10
Thanks Kev, I have ordered my Factory Pro Ti kit.
|
|
Kev W
Moderator
Quake 2003 VTR1000F Black, Parkwood, Gold Coast, Qld.
Posts: 289
|
Post by Kev W on Mar 18, 2018 0:43:20 GMT 10
All good Jas, I have a copy of Jays jetting guide now so its a good working base line to work from.
|
|
|
|
Post by kenmoore on Mar 18, 2018 20:25:47 GMT 10
Good luck !
|
|
|
|
Post by lucifer71 on Mar 19, 2018 19:17:09 GMT 10
I've also picked up a second set of carbs
|
|
Kev W
Moderator
Quake 2003 VTR1000F Black, Parkwood, Gold Coast, Qld.
Posts: 289
|
Post by Kev W on Mar 20, 2018 16:55:57 GMT 10
I've also picked up a second set of carbs <iframe width="24.200000000000045" height="2.8799999999999955" style="position: absolute; width: 24.2px; height: 2.88px; z-index: -9999; border-style: none; left: 0px; top: 0px;" id="MoatPxIOPT0_70567685" scrolling="no"></iframe> <iframe width="24.200000000000045" height="2.8799999999999955" style="position: absolute; width: 24.2px; height: 2.88px; z-index: -9999; border-style: none; left: 1145px; top: -104px;" id="MoatPxIOPT0_88962290" scrolling="no"></iframe> <iframe width="24.200000000000045" height="2.8799999999999955" style="position: absolute; width: 24.2px; height: 2.88px; z-index: -9999; border-style: none; left: 10px; top: -13px;" id="MoatPxIOPT0_45023831" scrolling="no"></iframe> <iframe width="24.200000000000045" height="2.8799999999999955" style="position: absolute; width: 24.2px; height: 2.88px; z-index: -9999; border-style: none; left: 1145px; top: -13px;" id="MoatPxIOPT0_96237751" scrolling="no"></iframe> Good stuff Jas, we can give them a good clean up and between those and your originals make sure you have the best bits, ie, Vacuum Diaphrams etc |
|
|
|
Post by lucifer71 on Mar 20, 2018 18:46:43 GMT 10
That was my thoughts as well
|
|
vtrstormer
Admin
I feel the need, the need for a few twisties and a latte!
Posts: 1,663
|
Post by vtrstormer on Mar 25, 2018 23:26:18 GMT 10
I have found Best results are from stock shimmed needles and stocks jets and that’s with a stock air filter. I am using the Dr Honda velocity stacks and have Blocked one hole in the slide.
|
|
