|
Post by greenj69 on Mar 22, 2019 1:58:43 GMT 10
Hi! I was wondering if someone has some info on the master cylinder piston size on a vfr800? Is it bigger than the 14mm piston on the Storm?
|
|
|
Post by greenj69 on Mar 22, 2019 2:08:17 GMT 10
Hi! I was wondering if someone has some info on the master cylinder piston size on a vfr800? Is it bigger than the 14mm piston on the Storm? Anyone have a good master cylinder for sale as an upgrade on the vtr?
|
|
misnblu
Rookie
Still breathing
Posts: 11
|
Post by misnblu on Oct 13, 2020 21:41:23 GMT 10
Hi! I was wondering if someone has some info on the master cylinder piston size on a vfr800? Is it bigger than the 14mm piston on the Storm? Anyone have a good master cylinder for sale as an upgrade on the vtr? I'd go with the CBR600F4i master cylinder and while you're at it change out the stock calipers wit the F4i calipers too. You'll have to a minor bit of modification but basically fits right in for the calipers. I just bought the complete set of the F4i with calipers, master cylinder, and complete brake handle assembly for my ride. Everything I've read says this is probably one of the best mods you can make for the front brake setup for our bikes. That's why I went with it. Here's the link. www.superhawkforum.com/forums/modifications-performance-29/honda-f4i-brake-install-34837/Hope this helps and good luck if you're still on these forums. ๐ Seems a bit dead. ๐
|
|
|
Post by davo231481 on Oct 29, 2020 20:40:22 GMT 10
This calipers make a noticeable improvement over stock. While youโre at it go for a braided line set as your lines are fairly aged if still original
|
|